Model | PW-CCT1603 | PW-CCT2493 |
Internal size | 135x95x125(WxDxH)cm | 210x95x125(WxDxH)cm |
External size | 166X95X158(WxDxH)cm | 296X125X182(WxDxH)cm |
Power supply | AC1ø 220V 20A 50HZ | AC 380V 25A 50HZ |
Test box interior | Use GRP as a whole, thickness 5mm. Temperature-resistant can reach -40~120ºC. Make our equipment use the CASSI ACSSU NSS test for a long time without deformation. | |
Thermostatic case | Use GRP and PVC grey heat-resistant impact plate, PVC board function is to Protection and Beautification. | |
Chamber upper cover | Use GRP as a whole, thickness 5mm, Temperature-resistant can reach -40~120ºC. Make our equipment use CASS, ACSS, NSS tests for a long time without deformation. Enhanced Security window set and pneumatic cylinder left and right one group (automatic opening and closing). | |
Test refill drum | Use PP whiteboard, volume 100L, independent. | |
Test chamber basket frame | Using GRP heat resistant Corner. Setting product test angle 20°±5°, customizable test supports. | |
Saturated air drum | Made of SUS#304 stainless steel sheet, thickness 2mm. With an automatic water level controller, avoid the inconvenience of manual water addition. | |
Use temperature | According to the standards of CNS, JIS, ASTM adjustable conversion times of 30 min and 15 min. | |
Salt water test method | Test room : 35ºC±1ºC;Saturated air drum: 47ºC±1ºC | |
Corrosion resistance test method | Test room: 50ºC±1ºC; Saturated air drum:47ºC±1ºC | |
Drying test | Chamber temperature:40ºC~80ºC±0.5; Chamber humidity:30± 5%RH and nature humidity | |
Constant temperature and humidity test: Chamber temperature | 5ºC~85ºC±2; Cooling time: 60~5ºC about 30 min; Heating time: 5~85ºC about 30 min; Temperature deviation: ±2ºC; Humidity: 30%-98±5%RH |
|
Sprinkler test (optional) | Use automatic pressurized spray saltwater or pure water(according to customer requirements), automatic discharge outdoor after test over, customized on request. |
|
Humid- heat test | GB2423.3-93Basic environmental test rules for electrical and electronic products Test Ca: constant humid-heat test method. (Just satisfied specified temperature and humidity test) |